Cleaning; Work Area Maintenance - Omron LD User Manual

Hand-
Entanglement
Label (under
cover)
No Ride
and No
Incline
Labels
Laser
Labels
Magnetic
Field and
No-ride
Labels
Ø 0.25 Pass-through hole for brake
cable, through rear frame tube

10.4 Cleaning

Work Area Maintenance

The work area of the AIVs must be kept generally clean and free from clutter that could block
an AIV.
Anything spilled on the floor of the work area, such as dust, ice, pooled water, etc., must be
removed immediately, as this would interfere with the AIV's ability to drive safely, as well as
Chapter 10: Maintenance
Pinch
Hazard
Label
Figure 10-6. Locations of Labels on LD Cart Transporter
Figure 10-7. Magnetic Field/Pacemaker, No Riding Labels on Cart
LD Cart Transporter User's Guide, 14766-000 Rev B
Page 150 of 190
E-Stop Button
LATCH,
UNLATCH
Labels
Laser
Labels
ON,
OFF,
BRAKE
Labels
Magnetic
Field
Labels
(Underside
of Platform)