Omron LD User Manual page 41

3. Attach the flange of each support tube to the HMI post with two M6 screws, lock wash-
ers, and flat washers.
Support
Tube
Screw, BHCS,
M4 SS (x8)
LD Cart Transporter User's Guide, 14766-000 Rev B
Chapter 3: Setup
Figure 3-8. Connector and Cable for the Rear Laser
Washer, Lock Washer,
M6 SHCS SS Screw (x4)
Support Braces
Figure 3-9. Side Laser Support Tubes
Page 41 of 190
Laser Guard
Washer, Lock Washer,
M5 SHCS SS Screw (x8)