Get Negative Position Limit.vi; Get Motor's Rms Current Average Time.vi - Newport SMC100CC Manual

SMC100CC & SMC100PP
EDH0209En2020 – 04/13
2.2.40

Get motor's rms current average time.vi

This VI returns the programmed average period value for the calculation of the rms
current.
Connector Panel
Controls and Indicators
Axis in
Axis out
Motor's rms current average time (seconds)
2.2.41 Set motor's rms current average time.vi
This VI sets the averaging period for the calculation of the rms current.
Connector Panel
Controls and Indicators
Axis in
Motor's rms current average time (seconds)
Axis out
2.2.42

Get negative position limit.vi

This VI returns the programmed negative software position limit value for the
positioner.
Connector Panel
Controls and Indicators
Axis in
Axis out
Negative software position limit (units)
Single-Axis Motion Controller/Driver for DC or Stepper Motor
22