Vis Description - Newport SMC100CC Manual

SMC100CC & SMC100PP
2.0

VIs Description

EDH0209En2020 – 04/13
2.1 Serial Communication
2.1.1 Port Init.vi
This VI initializes RS-232 communication.
Serial Port # COM1 = 1, COM2 = 2, etc.
The following parameters are fixed:
Baud Rate = 57600; Data Bits = 8; Parity = None; Stop Bits = 1;
Flow Control = XON/XOFF; Termination Character = CR/LF
Connector Panel
Controls and Indicators
SerialPort
Timeout (ms)
2.1.2 Read Write.vi
This VI allows to send a command to the controller SMC 100 and to receive a
response via the connection RS-232. It is used in each VI.
Connector Panel
Controls and Indicators
Command
Query?
Response
Single-Axis Motion Controller/Driver for DC or Stepper Motor
4