Table of Contents
Advertisement
30
3.4
Status Indicator
The LED located near the power switch has several functions:
When the unit is turned on the unit goes through a series of verifications and turns the
LED solid green. The unit is ready to drive Picomotors.
If any problems are found, the LED will blink or turn on a color corresponding to the issue
found. Please refer to the following table and contact New Focus support if this happens.
CONDITION
No power applied to unit
Unit OK; no critical errors detected
Reboot condition occurred
Unit OK; 8758 hand control pad detected
Corrupted firmware detected
Critical fault detected (e.g. over-temperature)
Power Indicator
•
Status Indicator
•
•
Troubleshooter
Status Indicators position
Table 1
Status
Indicator
Power
Switch
LED STATE
OFF
Solid green
Fast blinking green for 0.5 second
Slow blinking amber
Solid amber
Solid red
LED Status Indicator
Advertisement
Table of Contents
