Set Motor's Peak Current Limit.vi - Newport SMC100CC Manual

SMC100CC & SMC100PP
2.2.37

Set motor's peak current limit.vi

This VI sets the maximum current allowed into the motor. If the controller detects a
higher current in the motor, it will generate a hardware error and a fault will be reported.
Connector Panel
Controls and Indicators
Axis in
Motor's peak current limit (Amperes)
Axis out
2.2.38 Get motor's rms current.vi
This VI returns the programmed rms current value allowed into the motor.
Connector Panel
Controls and Indicators
Axis in
Axis out
Motor's rms current (Amperes)
2.2.39 Set motor's rms current.vi
This VI sets the rms current allowed into the motor, it must be less than the current
limit.
If the controller detects a rms current in the motor higher than the speci- fied value, it
will generate a hardware error and a fault will be reported.
Connector Panel
Controls and Indicators
Axis in
Motor's rms current (Amperes)
Axis out
Single-Axis Motion Controller/Driver for DC or Stepper Motor
21 EDH0209En2020 – 04/13