Get Ttl Outputs Value.vi; Set Ttl Outputs Value.vi - Newport SMC100CC Manual

SMC100CC & SMC100PP
2.6.3

Get TTL outputs value.vi

This VI returns the TTL outputs value.
Connector Panel
Controls and Indicators
Axis in
Axis out
TTL outputs value (decimal)
2.6.4

Set TTL outputs value.vi

This command sets the TTL output value. This decimal number represents the binary
word made of all outputs where bit 0 is output 1, bit 1 is out- put2, etc...
Setting a 1 to the output will close the open collector output transistor. Setting a 0 to the
output will block the open collector output transistor.
Connector Panel
Controls and Indicators
Axis in
TTL outputs value (decimal)
Axis out
Single-Axis Motion Controller/Driver for DC or Stepper Motor
53 EDH0209En2020 – 04/13