Tp Read Current Position; Tq Acquisition On External Signal - Newport LDS1000 User Manual

LDS1000
10.5.18
Related commands
10.5.19
EDH0170FE1010 – 09/98
TP
Use MNL
Syntax xxTP
Parameter xx
Description
Response xxTPnn
1TPnn1,2TPnn2
Errors D
S
Example TP
1TP4.5,2TP1254.6
TB
TE
TQ
Use MNL
Syntax TQnn
Parameter nn
Description
Response
Errors C
D
Example TQ10
This external input can be a simple push button without rebound, which
enables the operator to carry out the measurements at the most appro-
priate moment.
Controller for Laser Diode Sensors
Read Current Position
RMT ACT
Number of axis to be read (xx = 1 for Y and xx = 2 for Z).
xx missing or xx ≠ 1 and xx ≠ 2
Read current position.
or
Execution not allowed.
Communication time-out.
| Request position.
| Y = 4.5 and Z = 1254.6.
Read error.
Read error code.
Acquisition on External Signal
RMT ACT
1 at NBMAX: number of measurements to be performed
(NBMAX = max. number of measurements related to the memo-
ry installed).
Possible error
nn outside authorized interval
Performs an acquisition of nn measurements triggered by an
external signal wired to the TRIGG input (active on upward front).
The integration constant set by KI is used.
The number of the acquisition in progress is given by XN.
None.
Parameter out of limit.
Execution not allowed.
| Launch the acquisition of 10 measurements triggered by an exter-
nal (TRIGG input).
52
Read two axes.
Error C
NOTE