Set Home High Velocity.vi - Newport SMC100CC Manual

SMC100CC & SMC100PP
EDH0209En2020 – 04/13
2.2.23

Set HOME high velocity.vi

This VI sets the high velocity that will be used by the motion profiler to move the
positioner during the HOME search sequence.
Connector Panel
Controls and Indicators
Axis in
HOME high velocity (units/s)
Axis out
2.2.24 Get HOME time-out.vi
This VI returns the programmed maximum time value allowed for the home search.
Connector Panel
Controls and Indicators
Axis in
Axis out
HOME time-out (seconds)
2.2.25 Set HOME time-out.vi
This VI sets the maximum time allowed for the HOME search sequence to find HOME.
If the sequence does not finish successfully before this time elapses, it will be aborted
and an error is reported.
Connector Panel
Controls and Indicators
Axis in
HOME time-out (seconds)
Axis out
Single-Axis Motion Controller/Driver for DC or Stepper Motor
16