X6 - M12 Circular Connector, 4-Pole (Operating Voltage); X4 - M8, 4-Pole Socket (Proximity Switch) - Option Only - Burkert 8692 Operating Instructions Manual

Type 8692, 8693
Installation
Pin Wire.color* Configuration
Output.signals.to.the.control.centre.(e.g..PLC).
(required.for.analogue.output.and/or.binary.output.option.only)
6 pink Analog position feedback +
5 gray Analog position feedback GND
4 yellow Binary output 1
3 green Binary output 2
2 brown Binary outputs GND
* The indicated wire colours refer to the connection cable, part no. 919061, available as an accessory.
Table 11: X1 - M12 circular connector, 8-pole
13.1.3 X6 - M12 circular connector, 4-pole (operating voltage)
Pin Wire.color* Configuration
1 brown +24 V
2 not used
3 blue GND
4 not used
* The indicated wire colours refer to the connection cable, part no. 918038, available as an accessory.
Table 12:

X6 - M12 circular connector, 4-pole (operating voltage)

13.1.4 X4 - M8, 4-pole socket (proximity switch) - option only
Pin Wire.color* Configuration
1 brown Proximity switch 1 out
2 white GND
3 blue +24 V DC
4 not used
* The indicated wire colours refer to the connection cable, part no. 92903475, available as an accessory.
Table 13: X4 - M8, 4-pole socket, proximity switch
On.the.device.side External.circuit./.Signal.level
6 + (0/4 ... 20 mA or 0 ... 5 / 10 V)
for operating voltage, galvanically
isolated
5 GND Analog feedback
4 24 V / 0 V
3 24 V / 0 V
2 GND
On.the.device.side External.circuit./.Signal.level
1
24 V DC ± 10 %
max. residual ripple 10%
3
On.the.device. External.circuit./.Signal.level
side
1
2 Proximity switch
3
english
51