Configuring.the.auxiliary.functions; Configuring.the.auxiliary.functions; Activating.and.deactivating.auxiliary.functions; Including Auxiliary Functions In The Main Menu - Burkert 8692 Operating Instructions Manual

25 CONFIGURING THE AUXILIARY FUNCTIONS
The device has auxiliary functions for demanding control tasks.
This chapter describes how the auxiliary functions are activated, set and configured.
25.1 Activating and deactivating auxiliary functions
The required auxiliary functions must be activated by the user initially by incorporation into the main menu (MAIN).
The parameters for the auxiliary functions can then be set.
To deactivate a function, remove it from the main menu. This will cause the previous settings, created under this
function, to be rendered invalid again.
25.1.1 Including auxiliary functions in the main menu
Procedure:
Key Action
MENU Press
/ Select ADD.FUNCTION
ENTER
Press
/ Select required auxiliary
function
ENTER
Press
EXIT
Press
The parameters can then be set as follows.
/ Select the auxiliary function
ENTER
Press
*
EXIT Press
*
ESC
EXIT Press
* The designation of the key depends on the selected auxiliary function.
Table 51: Incorporating auxiliary functions
The changed data is saved in the memory (EEPROM) only when there is a switch to the process level,
by leaving the main menu (MAIN) using the left selection key
symbol is indicated
108
Description
Switching from process level
for approx. 3 s
The possible auxiliary functions are displayed.
The selected auxiliary function is now marked by a cross
Acknowledgment and simultaneous return to the main menu (MAIN).
The marked function is now activated and incorporated into the
main menu.
In the main menu (MAIN) select the auxiliary function.
Opening the submenu to input the parameters.
Further information about the setting can be found in the following
chapter "25.2 Overview and description of the auxiliary functions",
page 110
Return to a higher level or to the main level (MAIN).
Switching from setting level
on the display.
english
Type 8692, 8693
Auxiliary functions
setting level.
process level.
EXIT . During the save process, the save
.