Setting The Proximity Switch - Burkert 8692 Operating Instructions Manual

13.2.2 Setting the proximity switch
The proximity switch can be set to the bottom or the top end position. The handling of the settings differs
for the various control functions.
Figure 30:

Setting the proximity switch

Bottom end position for control function A or
top end position for control function B
→
Switch on operating voltage at the proximity switch connector.
→
Using a screwdriver, set proximity switch at the setting screw to end position.
→
Switch off operating voltage at the proximity switch connector.
54
Electronics module
english
Type 8692, 8693
Installation
Setting screw
Jumper
Home position Jumper
Setting control function:
A and I →
bottom end position
B →
top end position
Jumper set
Setting control function:
A and I →
bottom end position
B →
top end position