Install Type 8692/8693 - Burkert 8692 Operating Instructions Manual

12.3.3 Install Type 8692/8693
Figure 14: Installation of Type 8692/8693 on process valves, example showing Type 2301
During the installation, the collets of the pilot air ports must not be fitted to the actuator.
→
Aligning actuator with type 8692/8693:
1. Align the pilot air ports of the actuator with the connection pieces of Type 8692/8693 (see "Figure 15").
Figure 15: Aligning the pilot air ports
2. Align the puck of the actuator with the guide rail of Type 8692/8693 (see "Figure 16")
Figure 16: Aligning the puck
38
Housing jacket
Electrical
connection housing
Actuator
Valve body
Guide rail
Puck
english
Fastening screws
max. 1.5 Nm
Connection piece
Pilot air ports
Type 8692, 8693
Installation
Types
8692/8693
Process valve
(example: Type 2103)