Technical.data; Technical.data; Conformity; Standards - Burkert 8692 Operating Instructions Manual

10 TECHNICAL DATA
10.1

Conformity

In accordance with the Declaration of conformity, Type 8692 / 8693 is compliant with the EC Directives.
10.2

Standards

The applied standards which are used to demonstrate compliance with the EC Directives are listed in the
EC-Type Examination Certificate and/or the EC Declaration of Conformity.
10.3

Licenses

The product is approved for use in zone 2 and 22 in accordance with ATEX directive 94/9/EC category 3GD.
Observe instructions on operation in an explosion-risk (Ex) area.
Observe the ATEX additional instructions.
The product is cULus approved. Instructions for use in the UL area see chapter "10.8 Electrical data".
10.4 Operating conditions
WARNING!
Solar.radiation.and.temperature.fluctuations.may.cause.malfunctions.or.leaks.
▶ If the device is used outdoors, do not expose it unprotected to the weather conditions.
▶ The permitted ambient temperature may not exceed the maximum value or drop below the minimum value.
Ambient temperature
Degree of protection
Evaluated by the manufacturer:
IP65 / IP67 according to EN 60529 *
* only if cables, plugs and sockets have been connected correctly and in compliance with the exhaust air concept
(see chapter "12.7 Pneumatic connection of the Type 8692/8693", page 46.
28
The permitted temperature range is given on the rating plate of the device.
english
Evaluated by UL:
UL Type 4x Rating *
Type 8692, 8693
Description of System