Burkert 8692 Operating Instructions Manual page 155

Type 8692, 8693
Auxiliary functions
If several diagnosis messages are available with different status signals, the status signal with the highest priority
is shown on the display.
Overview.of.the.status.signals.according.to.NE.107.(NE.=.NAMUR.recommendation):.
Priority 1
Status.signal
Description Failure
Table 76: CONFIG.MSG; overview of status signals
The following status signals have been preset at the factory for the messages of the diagnosis functions:
Diagnosis.function
SERVICE.TIME
TRAVEL.ACCU
CYCLE.COUNTER
TEMP.CHECK
STROKE.CHECK
PV.MONITOR
POS.MONITOR
Table 77: CONFIG.MSG; factory setting (Default)
Assignment.of.status.signals:
Key Action
/ Select CONFIG.MSG
ENTER
Press
/ Select required diagnosis
function
ENTER
Press
/ Select required status signal
SELEC
Press
EXIT Press
EXIT Press
Table 78: CONFIG.MSG; assignment of status signals
2
Function check
Status.signal.according.to.NE.107
Maintenance required
Maintenance required
Maintenance required
Out of specification
Out of specification
Out of specification
Out of specification
Description
All activated diagnosis functions, which can output a message, are
displayed.
The list of possible status signals is displayed.
The selected status signal is now marked by a filled circle
Acknowledgment and simultaneous return to the CONFIG.MSG
menu.
The status signal is now assigned to the diagnosis function.
Return to the DIAGNOSE main menu.
3 4
Out of specification Maintenance required
Signal.
Miniature
english
Priority
4
4
4
3
3
3
3
.
155