Burkert 8692 Operating Instructions Manual page 134

• Safepos.-.Outputting.the.message:.Actuator.in.safety.position
• ERR.SP/CMD.-.Outputting.the.message:.Sensor.break.for.process.set-point.value/set-point.position.
Only available if the function in the SIG.ERR menu has been activated (SIG.ERR → SP/CMD input → Error on).
See chapter "25.2.12 SIG.ERROR – Configuration of signal level fault detection".
• ERR.PV -.Outputting.the.message:.Sensor.break.for.process.actual.value.(only.for.Type.8693).
Only available if the function in the SIG.ERR menu has been activated (SIG.ERR → PV Input → Error on).
See chapter "25.2.12 SIG.ERROR – Configuration of signal level fault detection".
• Remote.-.Output.AUTOMATIC./.MANUAL.operating.state
• Tune.Status -.Output.TUNE.(process.optimization)
Key Action
/ Select submenu option
SELEC
Press
Table 59: OUT BIN1 / OUT BIN2; specifying Safepos, ERR.SP/CMD, ERR.PV, Remote or Tune.Status as output.
• DIAG.State-1/2.-.Diagnosis.output.(option).
Outputting.the.message:.Diagnosis.message.from.selected.status.signal.
For description see chapter "25.2.21 DIAGNOSE – Menu for monitoring valves (option)".
Key Action
/ Select DIAG.State-1/2
SELEC
Press
/ Select status signal
SELEC
Press
EXIT Press
Table 60: OUT.type; inputting switching status for binary output and return to the process level.
134
Description
(Safepos, ERR.SP/CMD, ERR.PV, Remote or Tune.Status).
Acknowledge submenu option as output function for the binary
output. The selection is marked by a filled circle
Then set the required switching status in the OUT.type submenu.
Description
The status signals, which can be activated for outputting the
message, are displayed.
Select the status signal which is to be assigned to the diagnosis
output.
Activate the selection by checking the box
unchecking the box
If required, activate further status signals for the diagnosis output by
pressing the
Acknowledgment and simultaneous return to the OUT BIN 1/2 menu.
Then set the required switching status in the OUT.type submenu.
english
Type 8692, 8693
Auxiliary functions
.
/ and keys.
SELEC
.
or deactivate it by