Accessories; Factory.settings; Communications.software; Usb.interface - Burkert 8692 Operating Instructions Manual

10.10 Factory settings
The factory settings can be found in chapter "26. Operating structure and factory settings", page 178.
The factory presets are highlighted in blue to the right of the menu in the operating structure.
Examples:
Representation
2.0 %
10.0 sec /....
Table 8: Illustration of the factory settings
11

ACCESSORIES

Designation
Connection cable with M12 socket, 8-pole, (length 2 m)
Connection cable with M12 socket, 4-pole, (length 5 m)
Connection cable with M8 circular connector, 4-pole, (length 5 m)
Connection cable with M8 socket, 4-pole, (length 5 m)
USB adapter for connection to a PC in conjunction with an extension cable
Communicator
Screwing tool for opening/closing the transparent cap
Table 9: Accessories
11.1 Communications software
The PC operating program "Communicator" is designed for communication with the devices from the Bürkert posi-
tioner family (valid since serial number 20000).
A detailed description and precise schedule of the procedure for the installation and operation of the software
can be found in the associated documentation.
Download the software at:
11.2 USB interface
The PC requires an USB interface for communication with the positioners as well as an additional adapter with
interface driver ("Table 9: Accessories").
The data transfer must be according to HART specification.
32
Description
Menu options activated or selected at the factory
Menu options not activated or selected at the factory
Values set at the factory
www.burkert.com
english
Type 8692, 8693
Description of System
Order.no.
919061
918038
92903475
92903474
227093
Information at www.
burkert.com
674077