Burkert 8692 Operating Instructions Manual page 163

Electropneumatic positioner and process controller
Table of Contents

Advertisement

Type 8692, 8693
Auxiliary functions
Specifying.interval.for.the.output.of.messages
Key
Action
/
Select TRAVEL.ACCU
ENTER
Press
* Required for analog position sensor only (setting the STROKE submenu)
/
*
Select STROKE
*
INPUT
Press
/
*
Increase value
<
Changing the decimal
place
/
Select LIMIT
INPUT
Press
/
Increase value
<
Changing the decimal
place
OK
Press
EXIT
Press
Table 84:
TRAVEL.ACCU; specifying interval.
CYCLE.COUNTER –.Direction.reversal.counter
The direction reversal counter counts the number of changes in direction of the actuator piston. A change in direction
is detected when the position of the actuator piston changes by at least 1 %.
The interval for outputting messages is specified by inputting a limit for the total number of changes in direction.
• To do this, a history entry is made in the HISTORY submenu. For description see "25.2.21.7. History entries in
the HISTORY submenu".
• The status signal, which is assigned to the message, is indicated at short intervals on the display.
See also D.MSG and CONFIG.MSG in chapter "25.2.21.5", page 154.
Display.CYCLE.COUNTER
CYCLE.COUNTER
1000000
LIMIT
NEXT.M
999960
HISTORY
EXIT
29-7-1
INPUT
Table 85:
SERVICE.TIME; operating-hours counter
Description
(To do this, the TRAVEL.ACCU function must be incorporated into
the DIAGNOSE main menu. See chapter "25.2.21.4. Activation of
diagnosis functions").
The menu is displayed.
The preset value is displayed.
Set total stroke of the actuator piston.
The preset value is displayed.
Setting interval for outputting the message (limit for total number of
piston movements).
Return to the TRAVEL.ACCU menu.
Return to the DIAGNOSE main menu.
Description.of.the.functions
The interval for outputting the message can be changed in the LIMIT
submenu. 1 million changes in direction have been preset at the factory.
After NEXT.M the remaining changes in direction are displayed until the
next message appears.
The history entries of the last 3 messages can be viewed and deleted in
the HISTORY submenu.
english
163

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8693

Table of Contents