Output - Configuring The Outputs (Option) - Burkert 8692 Operating Instructions Manual

25.2.14 O UTPUT – Configuring the outputs (option)
The OUTPUT menu option is only indicated in the selection menu of ADD.FUNCTION if the Type
8692/8693 has outputs (option).
The.Type.8692/8693.which.has.the.outputs.option.is.available.in.the.following.versions:
• one analogue output
• one analogue and two binary outputs
• two binary outputs
According to the version of the Type 8692/8693 only the possible adjustable outputs (ANALOGUE,
ANALOGUE + BIN 1 + BIN 2 or BIN 1 + BIN 2) are indicated in the OUTPUT menu option.
OUTPUT
Figure 83: Operating structure OUTPUT;
25.2.14.1. OUT ANALOG - Configuring the analogue output
Type.8692: The feedback of the current position (POS) or of the set-point value (CMD) can be transmitted to the
control center via the analog output.
Type.8693: The feedback of the current position (POS) or of the set-point value (CMD), of the process actual value
(PV) or of the process set-point value (SP) can be transmitted to the control center via the analog output.
OUT ANALOG
Figure 84: Operating structure OUTPUT-ANALOG;
130
OUT ANALOG
ENTER
OUT BIN1
OUT BIN2
EXIT
ENTER
POS
CMD
For.Type.8693.only.(process control):.
PV
SP
OUT type
EXIT
english
Type 8692, 8693
Auxiliary functions
Configuration of the analogue output
ENTER
Configuration of the binary output 1
ENTER
Configuration of the binary output 2
ENTER
SELEC
Output of actual position
Output of set-point position
Output of the process actual value
Output of the process set-point value
4 - 20 mA
ENTER
0 - 20 mA
0 - 10 V
0 - 5 V
EXIT
SELEC
Selection of the
standard signal