Electrical.installation.24.V.dc; Electrical.installation.24.V.dc; E Lectrical.installation.with.circular.plug-In.connector; Safety Instructions - Burkert 8692 Operating Instructions Manual

Type 8692, 8693
Installation
13 ELECTRICAL INSTALLATION 24 V DC
There are 2 connection options for Type 8692/8693:
• Multi-pole with circular plug-in connector
• Cable gland with connection terminals
Signal.values
Operating voltage:
Set-point value
(process/position controller):
Actual value
(only process controller):
13.1 E lectrical installation with circular plug-in
connector
13.1.1 Safety instructions
DANGER!
Risk.of.injury.due.to.electrical.shock!
▶ Before reaching into the system, switch off the power supply and secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations for electrical equipment!
WARNING!
Risk.of.injury.from.improper.installation!
▶ Installation may be carried out by authorized technicians only and with the appropriate tools!
Risk.of.injury.from.unintentional.activation.of.the.system.and.uncontrolled.restart!
▶ Secure system against unintentional activation.
▶ Following installation, ensure a controlled restart.
Using the 4 – 20 mA set-point value input
If several devices of Type 8692/8693 are connected in series and the power supply to a device in this
series connection fails, the input of the failed device becomes highly resistive. As a result, the 4 – 20 mA
standard signal fails. In this case please contact Bürkert Service directly.
If PROFIBUS DP or DeviceNet:
The designation of the circular plug-in connectors and sockets and the contacts can be found in the
respective chapters.
24 V DC
0 ... 20 mA; 4 ... 20 mA
0 ... 5 V; 0 ... 10 V
4 ... 20 mA;
frequency;
Pt 100
english
49