X3, Motor - REXROTH EcoDrive Cs Project Planning Manual

Rexroth EcoDrive Cs Drives

X3, Motor

Graphic Representation
Connection Cross Section
DOK-ECODR3-DKC**.3-CS*-PR02-EN-P
DANGER
Technical Data of the Terminal Connector
Fig. 5-15: Terminal connector X3
Design
Type
spring tension
Fig. 5-16: Design
Max. connectable cross section
Fig. 5-17: Connection cross section
Lethal electric shock caused by live parts with
more than 50 V!
⇒ Before starting to work on the drive controller switch
off the voltage supply via the main switch or the fuse.
⇒ Always mount or dismount both connectors (motor
connection and mains connection) at the drive
controller.
⇒ Observe the notes in the "Safety Instructions for
Electric Drives and Controls" chapter.
U
V
W
Ground
schnittstellen_X3.fh7
Number of poles
4
[mm²]
0,75 - 2
Electrical Connections
Type of design
socket on connector
Max. cross section in AWG
gauge No.:
18 - 14
5-9