Task
Display statistics about traffic on
the RPR ring.
Display the settings of all
configurable RPR timers.
Display RPR topology
information.
Display VRRP standby group
information of RPR.
Clear the statistics about
protection events on the RPR
station.
Clear the statistics of the specified
RPR physical ports.
Clear the statistics of the specified
RPR logical interfaces.
RPR configuration examples
RPR interface binding configuration example
Network requirements
As shown in
Bind the RPR physical ports to the RPR logical interface on each station.
Figure 15 Network diagram
Station A
000F-E257- 0001
000F- E257- 0005
Command
display rpr statistics { dmac |
smac } [ mac-address ] [ rpr
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
display rpr timers [ rpr
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
display rpr topology { all | local |
ring | stations } [ summary ] [ rpr
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
display rpr vrrp-info [ rpr
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
reset rpr protection statistics
[ rpr interface-number ]
reset counters interface
[ rprpos [ interface-number ] ]
reset counters interface [ rpr
[ interface-number ] ]
Figure
15, stations A through E form an RPR ring.
Station B
000F-E257- 0002
Station E
000F-E257- 0004
Station C
000F- E257- 0003
Station D
66
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in user view.
Available in user view.
Available in user view.
East port (RPRPOS1/2)
West port (RPRPOS1/1)
Ringlet 0
Ringlet 1