HPE FlexNetwork HSR6800 series Configuration Manual page 253

configuring role preemption for Smart Link
group, 116
configuring RRPP port, 80
enabling DLDP, 39
IPv4 VRRP configuration, 143
IPv4 VRRP interface tracking
configuration, 159
IPv4 VRRP single group configuration, 157
IPv6 VRRP configuration, 151
resetting DLDP state in port/port group
view, 42
RRPP common, 72
RRPP edge, 72
RRPP primary master, 71
RRPP primary transit, 71
RRPP secondary master, 71
RRPP secondary transit, 71
setting DLDP shutdown mode, 40
Smart Link load sharing mechanism, 113
Smart Link primary port, 112
Smart Link secondary port, 112
preemption
Smart Link group, 116
Smart Link mechanism, 113
primary
RRPP master port, 71
RRPP transit port, 71
Smart Link link, 112
Smart Link port, 112
probe
DLDP link state, 32
procedure
activating RRPP domain, 82
adding static ringlet selection entry, 60
associating Track and detection modules, 204
associating Track with application
module, 206
associating Track with BFD, 204
associating Track with interface
management, 205
associating Track with NQA, 204
associating Track with PBR, 208
associating Track with static routing, 207
associating Track with VRRP, 206
binding RPR logical interface with RPR
physical port, 58
configuring ATD timer, 62
configuring basic BFD, 198
configuring basic CFD settings, 22
configuring BFD for a VRRP backup to
monitor the master, 214
configuring BFD for VRRP master to monitor the
uplink, 217
configuring CFD, 27
configuring CFD continuity check on MEP, 24
configuring CFD function, 24
configuring CFD linktrace on MEP, 25
configuring CFD loopback on MEP, 25
configuring CFD MEP, 23
configuring CFD MIP generation rules, 24
configuring CFD protocol version, 22
configuring CFD service instances, 22
configuring default ringlet selection, 61
configuring DLDP authentication, 41
configuring DLDP duplex mode, 38
configuring Ethernet interface speed (DLDP), 38
configuring Ethernet OAM basic functions, 11
configuring Ethernet OAM connection
detection, 11
configuring Ethernet OAM errored frame event
detection, 12
configuring Ethernet OAM errored frame period
event detection, 12
configuring Ethernet OAM errored frame seconds
event detection, 13
configuring Ethernet OAM errored symbol event
detection, 12
configuring Ethernet OAM link monitoring, 12
configuring hold off timer, 63
configuring IPv4 VRRP interface tracking, 159
configuring IPv4 VRRP packet attribute, 150
configuring IPv4 VRRP single group, 157
configuring IPv4 VRRP trap function, 151
configuring IPv4/IPv6 VRRP version, 142
configuring IPv6 VRRP packet attribute, 156
configuring keepalive timer, 63
configuring member port for Smart Link
group, 115
configuring member port in interface view, 116
configuring member port in Smart Link group
view, 115
configuring protected VLAN for Smart Link
group, 114
configuring reserved bandwidth or rate limiting, 61
configuring ringlet selection table, 60
configuring role preemption for Smart Link
group, 116
configuring router priority, preemptive mode and
tracking function, 147, 154
configuring RPR basic function, 57
configuring RPR fairness algorithm, 61
configuring RPR logical interface, 57
configuring RPR physical port, 57
246