HPE FlexNetwork HSR6800 series Configuration Manual page 146

High availability configuration guide
Hide thumbs Also See for FlexNetwork HSR6800 series:
Table of Contents

Advertisement

1.
The master assigns virtual MAC addresses to all members, including itself. This example
assumes that the virtual IP address of the VRRP group is 10.1.1.1/24, Router A is the master,
and Router B is the backup. Router A assigns 000f-e2ff-0011 to itself and 000f-e2ff-0012 to
Router B.
Figure 39 Virtual MAC address assignment
2.
When an ARP request arrives, the master (Router A) selects a virtual MAC address based on
the load balancing algorithm to answer the ARP request. In this example, Router A returns the
virtual MAC address of itself in response to the ARP request from Host A. It returns the virtual
MAC address of Router B in response to the ARP request from Host B (see
Figure 40 Answering ARP requests
Virtual MAC: 000f-e2ff-0011
ARP request
Target IP: 10.1.1.1/24
Gateway IP: 10.1.1.1/24
Host A
3.
Each host sends packets to the returned MAC address. As shown in
packets to Router A and Host B sends packets to Router B.
Network
Router A
Master
Virtual IP: 10.1.1.1/24
ARP reply
Target MAC: 000f-e2ff-0011
139
Router B
Backup
Virtual MAC: 000f-e2ff-0012
ARP request
Target IP: 10.1.1.1/24
Host B
Figure
40).
ARP reply
Target MAC: 000f-e2ff-0012
Gateway IP: 10.1.1.1/24
Figure
41, Host A sends

Advertisement

Table of Contents
loading

Table of Contents