Associating Track With Interface Management - HPE FlexNetwork HSR6800 series Configuration Manual

Step
1. Enter system view.
2. Create a track entry,
associate it with the BFD
session, and specify the
delay time for the Track
module to notify the
associated application
module when the track entry
status changes.
NOTE:
When associating Track with BFD, do not configure the virtual IP address of a VRRP group as the
local or remote address of a BFD session.

Associating Track with interface management

The interface management module monitors the physical status or network-layer protocol status of
the interface. The interface management module functions as follows when it is associated with a
track entry:
•
When the physical or network-layer protocol status of the interface changes to up, the interface
management module informs the Track module of the change and the Track module sets the
track entry to Positive.
•
When the physical or network-layer protocol status of the interface changes to down, the
interface management module informs the Track module of the change and the Track module
sets the track entry to Negative.
To associate Track with interface management:
Step
1. Enter system view.
2. Associating Track with
interface management.
Command
system-view
track track-entry-number bfd echo
interface interface-type interface-number
remote ip remote-ip local ip local-ip
[ delay { negative negative-time | positive
positive-time } * ]
Command
system-view
•
Create a track entry, associate it
with the interface management
module to monitor the physical
status of an interface, and specify
the delay time for the Track module
to notify the associated application
module when the track entry status
changes:
track track-entry-number interface
interface-type interface-number
[ delay { negative negative-time |
positive positive-time } * ]
•
Create a track entry, associate it
with the interface management
module to monitor the Layer 3
protocol status of an interface, and
specify the delay time for the track
module to notify the associated
application module when the track
entry status changes:
track track-entry-number interface
interface-type interface-number
protocol { ipv4 | ipv6 } [ delay
{ negative negative-time | positive
positive-time } * ]
205
Remarks
N/A
No track entry is created
by default.
Remarks
N/A
Use either method.
No track entry is created
by default.