HPE FlexNetwork HSR6800 series Configuration Manual page 198

Forwarder Information: 2 Forwarders 1 Active
Config Weight
Running Weight : 255
Forwarder 02
State
Virtual MAC
Owner ID
Priority
Active
Forwarder 03
State
Virtual MAC
Owner ID
Priority
Active
Forwarder Weight Track Information:
Track Object
The output shows that when the timeout timer expires, the VF corresponding to virtual MAC
address 000f-e2ff-4011 is removed, and no longer forwards the packets destined for the MAC
address.
# When Router A fails, use the display vrrp ipv6 verbose command to display the detailed
information about VRRP group 1 on Router B.
[RouterB] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface GigabitEthernet1/0/1
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Member IP List : FE80::2 (Local, Master)
Forwarder Information: 2 Forwarders 1 Active
Config Weight
Running Weight : 255
Forwarder 02
State
Virtual MAC
Owner ID
Priority
Active
Forwarder 03
FE80::1 (Master)
FE80::2 (Backup)
: 255
: Listening
: 000f-e2ff-4012 (Learnt)
: 0000-5e01-1103
: 127
: FE80::2
: Active
: 000f-e2ff-4013 (Owner)
: 0000-5e01-1105
: 255
: local
: 1 State : Positive
: Load Balance
: Virtual MAC
: 1 Adver Timer
: Up State
: 110 Running Pri
: Yes Delay Time
: None
: FE80::10
1::10
FE80::3 (Backup)
: 255
: Active
: 000f-e2ff-4012 (Owner)
: 0000-5e01-1103
: 255
: local
191
Weight Reduced : 250
: 100
: Master
: 110
: 5