HPE FlexNetwork HSR6800 series Configuration Manual page 238

VRRP Track Information:
Track Object
# After shutting down the uplink interface on Router A, display detailed information about VRRP
group 1 on Router B.
[RouterB-GigabitEthernet1/0/1] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface GigabitEthernet1/0/1
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
The output shows that when the uplink interface on Router A is shut down, the priority of Router A
decreases to 80. Router A becomes the backup, and Router B becomes the master. Packets from
Host A to Host B are forwarded through Router B.
: 1 State : Negative
: Standard
: Virtual MAC
: 1 Adver Timer : 1
: Up State
: 100 Running Pri : 100
: Yes Delay Time
: None
: 10.1.1.10
: 0000-5e00-0101
: 10.1.1.2
231
Pri Reduced : 30
: Master
: 0