HPE FlexNetwork HSR6800 series Configuration Manual page 226

Run Mode
Run Method
Total number of virtual routers : 1
Interface GigabitEthernet1/0/2
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
The output shows that when the status of track entry 1 becomes Positive, Router A is the master
and Router B the backup.
# When the uplink of Router A goes down, the status of track entry 1 becomes Negative.
<RouterA> display track 1
track 1
Track ID: 1
Status: Negative
Duration: 0 days 0 hours 0 minutes 22 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
BFD session:
Packet type: Echo
Interface : GigabitEthernet1/0/1
Remote IP : 1.1.1.2
Local IP : 1.1.1.1
# Display detailed information about the VRRP group on Router A.
<RouterA> display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface GigabitEthernet1/0/2
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
VRRP Track Information:
Track Object
# Display detailed information about VRRP group 1 on Router B.
<RouterB> display vrrp verbose
IPv4 Standby Information:
Run Mode
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 100 Running Pri
: Yes Delay Time
: 2200ms left
: None
: 192.168.0.10
: 192.168.0.101
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 110 Running Pri
: Yes Delay Time
: 2200ms left
: None
: 192.168.0.10
: 192.168.0.102
: 1 State : Negative
: Standard
219
: 1
: Backup
: 100
: 0
: 1
: Backup
: 90
: 0
Pri Reduced : 20