HPE FlexNetwork HSR6800 series Configuration Manual page 187

Become Master
Auth Type
Virtual IP
Master IP
The output shows that in VRRP group 1 Router A is the master, Router B is the backup and
packets sent from Host A to Host B are forwarded by Router A.
When interface GigabitEthernet 1/0/1 on Router A is not available, you can still ping Host B on
Host A. To view the detailed information about the VRRP group, use the display vrrp ipv6
verbose command.
# When interface GigabitEthernet 1/0/1 on Router A fails, display the detailed information about
VRRP group 1 on Router A.
[RouterA] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface GigabitEthernet1/0/2
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
VRRP Track Information:
Track Interface: GE1/0/1
# When interface GigabitEthernet 1/0/1 on Router A fails, display the detailed information about
VRRP group 1 on Router B.
[RouterB] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface GigabitEthernet1/0/2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
The output shows that when interface GigabitEthernet 1/0/1 on Router A is not available, the
priority of Router A reduces to 80 and it becomes the backup. Router B becomes the master
and packets sent from Host A to Host B are forwarded by Router B.
: 2200ms left
: Simple Key
: FE80::10
1::10
: FE80::1
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 110 Running Pri
: Yes Delay Time
: 2200ms left
: Simple Key
: FE80::10
1::10
: FE80::2
State : Down
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 100 Running Pri
: Yes Delay Time
: Simple Key
: FE80::10
1::10
: 0000-5e00-0201
: FE80::2
180
: hello
: 400
: Backup
: 80
: 5
: hello
Pri Reduced : 30
: 400
: Master
: 100
: 5
: hello