HPE FlexNetwork HSR6800 series Configuration Manual page 237

Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Object
# Display detailed information about VRRP group 1 on Router B.
[RouterB-GigabitEthernet1/0/1] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface GigabitEthernet1/0/1
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
VRRP Track Information:
Track Object
The output shows that in VRRP group 1, Router A is the master and Router B is a backup. Packets
from Host A to Host B are forwarded through Router A.
# Shut down the uplink interface GigabitEthernet 1/0/2 on Router A.
[RouterA-GigabitEthernet1/0/1] interface gigabitethernet 1/0/2
[RouterA-GigabitEthernet1/0/2] shutdown
After shutting down the uplink interface on Router A, you can still successfully ping Host B on Host A.
Use the display vrrp command to view information about VRRP group 1.
# After shutting down the uplink interface on Router A, display detailed information about VRRP
group 1 on Router A.
[RouterA-GigabitEthernet1/0/2] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface GigabitEthernet1/0/1
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Master IP
: 110 Running Pri
: Yes Delay Time
: None
: 10.1.1.10
: 0000-5e00-0101
: 10.1.1.1
: 1 State : Positive
: Standard
: Virtual MAC
: 1 Adver Timer : 1
: Up State
: 110 Running Pri : 80
: Yes Delay Time
: 3100ms left
: None
: 10.1.1.10
: 10.1.1.2
: 1 State : Negative
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 110 Running Pri
: Yes Delay Time
: None
: 10.1.1.10
: 10.1.1.2
230
: 110
: 0
Pri Reduced : 30
: Backup
: 0
Pri Reduced : 30
: 1
: Backup
: 80
: 0