Task
Display information about an MP
interface.
Display the statistics on TCP
header compression.
Display statistics on RTP header
compression.
Display statistics on Stac LZS
compression.
Clear all statistics on IP header
compression.
Clear statistics on Stac LZS
compression.
Clear statistics on a specified
interface.
PPP and MP configuration examples
One-way PAP authentication configuration example
Network requirements
As shown in
Configure Router A to authenticate Router B by using PAP, but Router B not to authenticate Router
A.
Figure 4 Network diagram
Configuration procedure
Configure Router A:
1.
# Create a user account for Router B.
<RouterA> system-view
[RouterA] local-user userb
# Set a password for the user account.
[RouterA-luser-userb] password simple passb
# Set the service type of the user account to PPP.
[RouterA-luser-userb] service-type ppp
Command
display ppp mp [ interface interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
display ppp compression iphc tcp
[ interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
display ppp compression iphc rtp
[ interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
display ppp compression stac-lzs
[ interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
reset ppp compression iphc
[ interface-type interface-number ]
reset ppp compression stac-lzs
[ interface-type interface-number ]
reset counters interface [ mp-group
[ interface-number ] ]
reset counters interface
[ virtual-template [ interface-number ] ]
Figure
4, Router A and Router B are interconnected through their Serial 2/0 interfaces.
27
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in user view.
Available in user view.
Available in user view.
Need help?
Do you have a question about the FlexNetwork MSR Series and is the answer not in the manual?