Displaying And Maintaining Rrpp; Rrpp Configuration Examples; Single Ring Configuration Example - HPE FlexNetwork HSR6800 series Configuration Manual

To configure an RRPP ring group:
Step
1. Enter system view.
2. Create an RRPP ring group and enter RRPP
ring group view.
3. Assign the specified subrings to the RRPP ring
group.

Displaying and maintaining RRPP

Task
Display brief RRPP information.
Display RRPP group
configuration information.
Display detailed RRPP
information.
Display RRPP statistics.
Clear RRPP statistics.

RRPP configuration examples

Single ring configuration example

Networking requirements
As shown in
•
Router A, Router B, Router C, and Router D form RRPP domain 1. Specify the primary control
VLAN of RRPP domain 1 as VLAN 4092, and specify that RRPP domain 1 protects VLANs 1
through 30.
•
Router A, Router B, Router C, and Router D form primary ring 1.
•
Specify Router A as the master node of primary ring 1, GigabitEthernet 3/0/1 as the primary port
and GigabitEthernet 3/0/2 as the secondary port.
•
Specify Router B, Router C, and Router D as the transit nodes of primary ring 1, their
GigabitEthernet 3/0/1 as the primary port and GigabitEthernet 3/0/2 as the secondary port.
Command
display rrpp brief [ | { begin |
exclude | include }
regular-expression ]
display rrpp ring-group
[ ring-group-id ] [ | { begin |
exclude | include }
regular-expression ]
display rrpp verbose domain
domain-id [ ring ring-id ] [ |
{ begin | exclude | include }
regular-expression ]
display rrpp statistics domain
domain-id [ ring ring-id ] [ |
{ begin | exclude | include }
regular-expression ]
reset rrpp statistics domain
domain-id [ ring ring-id ]
Figure 24,
Command
system-view
rrpp ring-group ring-group-id
domain domain-id ring ring-id-list
84
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in user view.