Configuration Examples; Lacp Mad-Enabled Irf Configuration Example - HPE FlexNetwork HSR6800 Configuration Manual

Task
Display information about all IRF
members.
Display the IRF fabric topology.
Display basic IRF settings.
Display MAD configuration.

Configuration examples

LACP MAD-enabled IRF configuration example

Network requirements
Set up a two-chassis IRF fabric at the access layer of the enterprise network in
LACP MAD in the IRF fabric, because the IRF fabric has a multichassis aggregate link to Router C,
an HPE device that supports extended LACP.
Figure 14 Network diagram
Configuration procedure
IMPORTANT:
For two neighboring IRF members, IRF links must be bound to IRF-port 1 on one member and to
IRF-port 2 on the other.
1. Configure Router A:
# Assign member ID 1 to Router A and bind Ten-GigabitEthernet 3/0/1 to IRF-port 2.
<Sysname> system-view
[Sysname] irf member 1
Command
display irf [ | { begin | exclude |
include } regular-expression ]
display irf topology [ | { begin |
exclude | include }
regular-expression ]
display irf configuration [ |
{ begin | exclude | include }
regular-expression ]
display mad [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
29
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Figure 14. Configure