Task
Display information about PPP access users.
Display PPP address pools.
Display IPHC statistics.
Display information about VT interfaces.
Display information about VA interfaces on a
VT interface.
Display information about one or all MP-group
interfaces.
Display MP information.
Clear IPHC statistics.
Log off a PPP user.
Clear the statistics for VA interfaces.
Clear the statistics for MP-group interfaces.
PPP and MP configuration examples
One-way PAP authentication configuration example
Network requirements
As shown in
authenticate Router A.
Figure 3 Network diagram
Ser2/1/0
200.1.1.1/16
Router A
Configuration procedure
1.
Configure Router A:
# Create a user account for Router B.
<RouterA> system-view
[RouterA] local-user userb class network
# Set a password for the user account.
[RouterA-luser-network-userb] password simple passb
Figure
3, configure Router A to authenticate Router B by using PAP, but Router B not to
Command
display ppp access-user { interface interface-type
interface-number [ count ] | ip-address ip-address |
ipv6-address ipv6-address | username user-name |
user-type { lac | lns | pppoa | pppoe } [ count ] }
display ip pool [ pool-name ] [ group group-name ]
display ppp compression iphc { rtp | tcp } [ interface
interface-type interface-number ]
display interface [ virtual-template [ interface-number ] ]
[ brief [ description | down ] ]
display interface [ virtual-access [ interface-number ] ]
[ brief [ description | down ] ]
display interface [ mp-group [ interface-number ] ] [ brief
[ description | down ] ]
display
ppp
interface-number ]
reset ppp compression iphc [ rtp | tcp ] [ interface
interface-type interface-number ]
reset ppp access-user { ip-address ipv4-ip-address
[ vpn-instance ipv4-vpn-instance-name ] | ipv6-address
ipv6-address [ vpn-instance ipv6-vpn-instance-name ] |
username user-name }
reset
counters
[ interface-number ] ]
reset counters interface [ mp-group [ interface-number ] ]
Ser2/1/0
200.1.1.2/16
Router B
26
mp
[
interface
interface
[
virtual-access
interface-type
Need help?
Do you have a question about the FlexNetwork MSR series and is the answer not in the manual?