Configuring Meps - HPE FlexNetwork HSR6800 series Configuration Manual

Step
2. Create an MD.
3. Create an MA.
4. Create a service instance.
Configuring a service instance with no MD name
When you create a service instance with no MD name, the system automatically creates the MD and
MA for the service instance.
To configure a service instance with no MD name:
Step
1. Enter system view.
2. Create a service instance
with no MD name.

Configuring MEPs

CFD is implemented through various operations on MEPs. As a MEP is configured on a service
instance, the MD level and VLAN attribute of the service instance become the attribute of the MEP.
Before creating MEPs, configure the MEP list first. A MEP list is a collection of local MEPs allowed to
be configured in an MA and the remote MEPs to be monitored.
IMPORTANT:
You cannot create a MEP if the MEP ID is not included in the MEP list of the service instance.
To configure a MEP:
Step
1. Enter system view.
2. Configure a MEP list.
3. Enter Ethernet interface
view.
4. Create a MEP.
5. Enable the MEP.
Command
cfd md md-name level
level-value
cfd ma ma-name md md-name
vlan vlan-id
cfd service-instance instance-id
md md-name ma ma-name
Command
system-view
cfd service-instance instance-id
maid format { icc-based
ma-name | string ma-name }
level level-value vlan vlan-id
Command
system-view
cfd meplist mep-list
service-instance instance-id
interface interface-type
interface-number
cfd mep mep-id
service-instance instance-id
{ inbound | outbound }
cfd mep service-instance
instance-id mep mep-id enable
23
Remarks
Not created by default.
Not created by default.
Not created by default.
Remarks
N/A
Not created by default.
Remarks
N/A
By default, no MEP list is
configured.
N/A
Not configured by default.
Disabled by default.