HPE FlexNetwork HSR6800 series Configuration Manual page 223

Track ID: 1
Status: Positive
Duration: 0 days 0 hours 2 minutes 22 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
BFD session:
Packet type: Echo
Interface : GigabitEthernet1/0/1
Remote IP : 192.168.0.101
Local IP : 192.168.0.102
The output shows that when the status of the track entry becomes Positive, Router A is the master,
and Router B the backup.
# Enable VRRP state debugging and BFD event debugging on Router B.
<RouterB> terminal debugging
<RouterB> terminal monitor
<RouterB> debugging vrrp state
<RouterB> debugging bfd event
# When Router A fails, the following output is displayed on Router B.
%Apr 1 17:35:18:236 2013 HPE VRRP/6/VRRP_STATUS_CHANGE: The status of IPv4 virt
ual router 1 (configured on GigabitEthernet1/0/1) changed from Backup to Master:
Timer expired.
*Apr 1 17:35:18:236 2013 HPE VRRP/7/DebugState:
IPv4 GigabitEthernet1/0/1 | Virtual Router 1 : Backup --> Master
r expired
%Apr 1 17:35:19:752 2013 HPE BFD/5/BFD_CHANGE_FSM: -Slot=2; Sess[192.168.0.102/
192.168.0.101,4098/0,GE1/0/1,Echo], Sta: UP->DOWN, Diag: 5
*Apr 1 17:35:19:752 2013 HPE BFD/7/EVENT: Send sess-down Msg, [Src:192.168.0.10
2,Dst:192.168.0.101,4098/0,GigabitEthernet1/0/1,Echo], instance:0, protocol:Track
# Display detailed information about the VRRP group on Router B.
<RouterB> display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface GigabitEthernet1/0/1
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Object
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 100 Running Pri
: Yes Delay Time
: None
: 192.168.0.10
: 0000-5e00-0101
: 192.168.0.102
: 1
216
: 1
: Master
: 100
: 0
State : Negative
reason: Time
Switchover