Activating An Rrpp Domain - HPE FlexNetwork HSR6800 series Configuration Manual

Step
3. Specify the current device as a transit
node of the ring, and specify the
primary port and the secondary port.
Specifying an edge node
When configuring an edge node, you must first configure the primary ring before configuring the
subrings.
Perform this configuration on a device to be configured as an edge node.
To specify an edge node:
Step
1. Enter system view.
2. Enter RRPP domain view.
3. Specify the current device as a transit
node of the primary ring, and specify
the primary port and the secondary
port.
4. Specify the current device as the edge
node of a subring, and specify the edge
port.
Specifying an assistant-edge node
When configuring an assistant-edge node, you must first configure the primary ring before
configuring the subrings.
Perform this configuration on a device to be configured as an assistant-edge node.
To specify an assistant-edge node:
Step
1. Enter system view.
2. Enter RRPP domain view.
3. Specify the current device as a transit
node of the primary ring, and specify the
primary port and the secondary port.
4. Specify the current device as the
assistant-edge node of the subring, and
specify an edge port.

Activating an RRPP domain

To activate an RRPP domain on the current device, enable the RRPP protocol and RRPP rings for
the RRPP domain on the current device.
Perform this operation on all nodes in the RRPP domain.
To prevent Hello packets of subrings from being looped on the primary ring, enable the primary ring
on its master node before enabling the subrings on their separate master nodes. On an edge node or
assistant-edge node, enable/disable the primary ring and subrings separately:
•
Enable the primary ring of an RRPP domain before enabling the subrings of the RRPP domain.
Command
ring ring-id node-mode transit [ primary-port
interface-type interface-number ] [ secondary-port
interface-type interface-number ] level level-value
Command
system-view
rrpp domain domain-id
ring ring-id node-mode transit [ primary-port
interface-type interface-number ] [ secondary-port
interface-type interface-number ] level level-value
ring ring-id node-mode edge [ edge-port interface-type
interface-number ]
Command
system-view
rrpp domain domain-id
ring ring-id node-mode transit [ primary-port
interface-type interface-number ] [ secondary-port
interface-type interface-number ] level level-value
ring ring-id node-mode assistant-edge [ edge-port
interface-type interface-number ]
82