Table of Contents
Advertisement
7. Replace the fans.
8. To re-install, follow these steps in reverse order.
Replacing the igniter fan (fan #16)
Estimated replacement time: 5 minutes per fan
1. Remove the rear lens side cover.
2. Disconnect the fan inline connector.
3. Remove the four screws securing the fan.
4. Remove the igniter fan and its safety cover.
5. Replace the igniter fan.
6. To re-install the igniter fan, follow these steps in reverse order.
Replacing the HIP fan (fan #13)
Estimated replacement time: 16 minutes per fan
1. Remove the card cage.
2. Disconnect the fan inline connector.
3. Remove the four screws securing the fan.
Roadie 4K35 and 4K45 Service Manual
020-101694-03 Rev. 1 (01-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Parts and module replacement
51
Advertisement
Table of Contents
