1. Shut down the projector (on page 39).
2. Remove the front top cover (on page 44).
3. Disconnect the blower on the LCM pump.
4. Disconnect the communications harness from the coolant reservoir.
5. Disconnect the coolant hoses from the coolant reservoir.
6. Remove the three screws securing the reservoir bracket to the projector base plate.
Roadie 4K35 and 4K45 Service Manual
020-101694-03 Rev. 1 (01-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Parts and module replacement
55