Replacing The Ac Relay - Christie Roadie 4K35 Service Manual

2. Slide the plate to release it and drop it down to remove.
3. Disconnect the four harness connections to the AC breaker switch.
4. Push in the AC breaker switch tabs and push the breaker through the access plate to remove.
5. To install the AC breaker switch, repeat these steps in reverse order.

Replacing the AC relay

Estimated replacement time: 10 minutes
1. Remove the rear lens-side cover (on page 43).
2. Remove the screw closest to the blower and loosen the screw closest to the igniter shield.
3. Lift the PVC shield to one side to gain access to the AC relay.
4. Loosen the six screws securing the harnesses to the AC relay.
5. Remove the eight harnesses.
Roadie 4K35 and 4K45 Service Manual
020-101694-03 Rev. 1 (01-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Parts and module replacement
76