Replacing The Liquid Cooling Pump Fan (Fan #14); Replacing The Imcb Fan (Fan #18) - Christie Roadie 4K35 Service Manual

4. Remove the HIP fan.
5. Replace the HIP fan.
6. To re-install the HIP fan, follow these steps in reverse order.

Replacing the liquid cooling pump fan (fan #14)

Estimated replacement time: 16 minutes per fan
1. Remove the liquid cooling module (on page 54).
2. Disconnect the fan inline connector.
3. Remove the two screws securing the fan.
4. Remove the liquid cooling pump fan.
5. Replace the liquid cooling pump fan.
6. To secure the liquid cooling pump fan, follow these steps in reverse order.

Replacing the IMCB fan (fan #18)

Estimated replacement time: 5 minutes
1. Remove the touch panel controller (on page 39).
2. Remove the rear cover (on page 44).
3. Disconnect the fan connector.
4. Remove the four screws securing the fan.
Roadie 4K35 and 4K45 Service Manual
020-101694-03 Rev. 1 (01-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Parts and module replacement
52