Replacing The User Interface Intake Fan (#16) - Christie Crimson Series Service Manual
Hide thumbs
Also See for Crimson Series:
- Installation and setup manual (59 pages) ,
- Technical reference (26 pages) ,
- User manual (65 pages)
Table of Contents
Advertisement
Replacing the user interface intake fan (#16)
The user interface intake fan draws air into the projector for the side panel display.
1. Remove the top cover (on page 42).
2. Remove the electronics-side cover (on page 43).
3. Disconnect the dual temperature sensor module (DTSM) harness and remove the harness from
the clip.
4. Loosen the two captive screws securing the DTSM bracket.
5. Remove the DTSM bracket.
6. Remove the fours screws securing the side panel display intake fan and remove it.
Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102733-02 Rev. 1 (01-2020)
Copyright
2020 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
52
Advertisement
Table of Contents
