Table of Contents
Advertisement
Inaccurate display colors
The colors of the projected image are not displaying accurately.
Resolution
•
Adjust the color, tint, color space, and color temperature settings of the input source.
•
On the touch panel controller, tapMenu > Configuration > Color Correction and verify the
settings are correct.
Display is not rectangular
The image displayed on the screen is not rectangular.
Resolution
•
Verify the projector is level and the lens surface and screen are parallel to one another.
•
Adjust the vertical offset of the lens mount.
Display has suddenly frozen
The image on the screen has frozen.
Resolution
•
If the source is frozen, restart the source device.
•
If the source is not frozen, restart the projector.
Display is jittery or unstable
The projected image has become jittery or unstable.
Resolution
•
Verify that the input device is connected properly. If the input device is not connected properly,
the projector repeatedly attempts to display an image.
•
The horizontal or vertical scan frequency of the input signal may be out of range for the
projector.
Roadie 4K35 and 4K45 Service Manual
020-101694-03 Rev. 1 (01-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Troubleshooting
34
Advertisement
Table of Contents
