Table of Contents
Advertisement
Indicates the presence of a fire hazard. To avoid personal injury and property damage, always adhere
to the instructions described in this manual.
Always disconnect all power sources before performing maintenance or service procedures.
See the product user manual for specific information and directions.
See the product service manual for specific information and directions.
Roadie 4K35 and 4K45 Service Manual
020-101694-03 Rev. 1 (01-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Never look directly into the projector lens. The
extremely high brightness can cause permanent eye
damage.
Indicates possible optical radiation emitted from the
product.
Indicates thermal radiation emitted from the product
may cause burns.
This label warns of a cross-connection hazard when installing multiple
projectors at once. A fire hazard exists if a lamp power supply interlock
cable is connected to a different projector than its lamp power cables.
For more information, see Adjust the projector tilt and level in the
Installation and Setup chapter
Service guidelines
15
Advertisement
Table of Contents
