Replacing The Laminar Airflow Device Fan (Fan #4) - Christie Roadie 4K35 Service Manual

3. Disconnect the radiator fan inline connector.
4. Loosen the four screws securing the radiator to the frame.
5. Remove the radiator and fan assembly.
6. Remove four screws securing the fan to the radiator.
7. To re-install, follow these steps in reverse order.
Related information
Filtration (on page 18)

Replacing the laminar airflow device fan (fan #4)

Estimated replacement time: 5 minutes
1. Remove the front top cover (on page 40).
2. Remove the light engine cover (on page 41).
3. To remove the LAD fan housing from the light engine handle, loosen the two captive screws.
Roadie 4K35 and 4K45 Service Manual
020-101694-03 Rev. 1 (01-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Parts and module replacement
47