Table of Contents
Advertisement
ID
Item
I
Air filter cover and air filter
J
Input panel
K
Connector box
Lamp power supply components
Learn the components of the lamp power supply.
ID
Item
A
Projector AC power outlet
B
Main LPS breaker
C
Projector Interlock and
communication connections
D
DC cable connectors
E
DC lamp power cables
Roadie 4K35 and 4K45 Service Manual
020-101694-03 Rev. 1 (01-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Description
Filters the intake air before it circulates through the front compartment
to cool the main electronics. See Removing the light engine air filter (on
page 45).
Provides a variety of ports for connecting external devices. See
Connecting devices.
Provides connections for the DC lamp and communication cables.
Description
Powers the projector head. Do not use this outlet to power other devices.
Acts as a power switch, protecting the lamp power supply (LPS) against
over-current conditions of 40A or more.
Provides communication between the projector and the LPS.
Locking connectors for DC cables. These connectors are shipped
separately and must be connected by an electrician.
Carries power from the LPS to the projection lamp.
Introduction
9
Advertisement
Table of Contents
