3. Tilt the front cover towards the front of projector to clear tabs, lift the cover, and remove.
4. To re-install, follow these steps in reverse order.
Removing the light engine cover
Remove the light engine cover to access the light engine.
Estimated replacement time: 1 minute
Notice. Failure to comply with the following may result in property damage.
•
Christie products must be installed and serviced by Christie qualified technicians.
1. Remove the front cover (on page 40).
2. Using the security key, unlock the light engine cover.
3. Lift up the cover and remove.
4. To re-install, follow these steps in reverse order.
Roadie 4K35 and 4K45 Service Manual
020-101694-03 Rev. 1 (01-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Parts and module replacement
41