Replacing The Card Cage Exhaust Fan (#4) - Christie Cinema 4K-RGB CP4315-RGB Service Manual

4. Disconnect the fan #5 harness inline connector.
5. To remove the fan with the bracket, loosen the three captive screws.
6. Remove the two screws securing the fan to the bracket.
7. Replace the fan.
8. To re-install, follow these steps in reverse order.

Replacing the card cage exhaust fan (#4)

The card cage exhaust fan draws hot air away from the card cage.
1. Remove the card cage (on page 45).
2. Disconnect HUB 4 fan harness P29.
3. Remove the seven screws using a 2.5 mm driver.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
58