Replacing The Card Cage Exhaust Fan (#25) - Christie Crimson Series Service Manual

9. Remove the fan from the rubber boot.
10. Replace the fan, if required.
11. To re-install, repeat these steps in reverse order.

Replacing the card cage exhaust fan (#25)

The card cage exhaust fan draws hot air from the card cage.
1. Remove the electronics-side cover (on page 43).
2. Remove the card cage (on page 66).
3. Disconnect the Fan 25 harness.
4. Remove the four screws securing the card cage exhaust fan and remove it.
Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102733-02 Rev. 1 (01-2020)
Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
56