Table of Contents
Advertisement
Example
The following example displays how to reconfigure switch number "1" to an
identifier of "2."
console(config)#switch 1 renumber 2
telnet
Use the telnet command to log into a host that supports Telnet.
Syntax
telnet {ip-address | hostname} [port] [keyword1......]
•
ip-address—Valid IP address of the destination host.
•
hostname—Hostname of the destination host. (Range: 1–158
characters).
•
port—A decimal TCP port number.
•
keyword—One or more keywords from the keywords table in the user
guidelines (see
Keywords Table
Options
/debug
/line
/localecho
<cr>
port
Default Configuration
port — Telnet TCP port (decimal 23) on the host.
Command Mode
User Exec, Privileged Exec mode
Keywords Table
Description
Enable telnet debugging mode.
Enable telnet linemode.
Enable telnet localecho.
Press ENTER to execute the command.
Enter the TCP port number.
below).
Switch Management Commands
2239
Advertisement
Table of Contents
